Pumpmarket.us
Online Water Pump Store
FREE SHIPPING, FAST DELIVERY! Dismiss
Skip to content
Join with us and be a part of the success
EASY SELECTOR
- CALL US
- +1 (786) 613-5872
- EMAIL US
- [email protected]
- CALL US
- +1 (786) 613-5872
- EMAIL US
- [email protected]
- CALL US
- +1 (786) 613-5872
- EMAIL US
- [email protected]
Self-priming Monoblock Trash Water Pump – 1.5HP – 7920 GPH – 2in. Ports – 3P – HG50-1.1
Self-priming Monoblock Trash Water Pump – 1.5HP – 7920 GPH – 2in. Ports – 3P – HG50-1.1
------
$940.01
Free Delivery
Estimated 3-5 business days
Note: For all products over 120 lbs, a $250 Residential Delivery & Lift Gate Fee applies to residential addresses.
You can add this service directly to your cart
If this service is not selected and your shipping address is residential, we will contact you after the order is placed to collect the required fee before shipping. 
Application:
Selfpriming monoblock water pumps with open impeller.
The check valve inside the suction outlet avoids the syphon effect when stopping and assures the automatic re-start each time. The pump selfprimes even if partially filled and if the suction hose is completely empty. Suitable to drain clean or slightly dirty water and in flood irrigation systems.
Brand: SPERONI
MADE IN ITALY
OPERATING CONDITIONS:
- – Liquid temperature up to 95°F (for home use according to EN 60335-2-41)
- – Temperature max. liquid: 194°F (for other uses)
- – Ambient temperature up to 104°F
- – Total suction lift up to 23 ft.
MOTOR
- – Single-phase 220V-60Hz- 3 Phase
- – Two-pole induction motor (n = 3450 min-1)
- – Insulation Class F
- – Protection IP 55
MATERIALS
- – Pump body: Cast Iron
- – Motor Support: Cast Iron
- – Impeller: Cast Iron
- – Shaft with rotor: Stainless Steel 304
- – Mechanical seal: Ceramic/Graphite/NBR
Made in Italy
Estimated Delivery Time: 3 – 5 Business Days
Application:
Selfpriming monoblock water pumps with open impeller.
The check valve inside the suction outlet avoids the syphon effect when stopping and assures the automatic re-start each time. The pump selfprimes even if partially filled and if the suction hose is completely empty. Suitable to drain clean or slightly dirty water and in flood irrigation systems.
Brand: SPERONI
MADE IN ITALY
OPERATING CONDITIONS:
- – Liquid temperature up to 95°F (for home use according to EN 60335-2-41)
- – Temperature max. liquid: 194°F (for other uses)
- – Ambient temperature up to 104°F
- – Total suction lift up to 23 ft.
MOTOR
- – Single-phase 220V-60Hz – 3 Phase
- – Two-pole induction motor (n = 3450 min-1)
- – Insulation Class F
- – Protection IP 55
MATERIALS
- – Pump body: Cast Iron
- – Motor Support: Cast Iron
- – Impeller: Cast Iron
- – Shaft with rotor: Stainless Steel 304
- – Mechanical seal: Ceramic/Graphite/NBR
More Details:
| Model | HG50-1.1 |
| Brand | SPERONI |
| Manufacturer’s Warranty | 1 year Limited Warranty |
| Impeller Material | Cast Iron |
| Port Size (in.) | 2 |
| Flow (GPH) | 7920 |
| HP | 1.5 |
| Volts
AMP |
220V – 3 Phase
2.3 |
| Max. Total Head (ft.) | 62.3 |
| Max. Suction Lift (ft.) | 23 |
| Max. PSI | 27.5 |
| Suction Port (in.) | 2 |
| Discharge Port (in.) | 2 |
| Self-Priming | Yes |
| Dimensions L x W x H (in.) | 13.8 x 7 x 8.2 |
| Product Weight (lbs.) | 56.4 |
