FREE SHIPPING, FAST DELIVERY! Dismiss

EASY SELECTOR
  • CALL US
  • +1 (786) 613-5872
  • EMAIL US
  • info@pumpmarket.us
  • CALL US
  • +1 (786) 613-5872
  • EMAIL US
  • info@pumpmarket.us
  • CALL US
  • +1 (786) 613-5872
  • EMAIL US
  • info@pumpmarket.us

1.5 HP Deep Suction Well Jet Self Priming Pump – 552 GPH – APM 150(P30)

5/5

Write a Review

1.5 HP Deep Suction Well Jet Self Priming Pump – 552 GPH – APM 150(P30)

SPERONI AMP Deep Suction Well Jet Self, Priming Pump, 150/200(P30)
FREE SHIPPING
SKU 1811111 Categories , , , Tags , , ,
------

$823.50

Add to Cart

Free Delivery

Estimated 3-5 business days

Note: If This is a heavy item (over 130 lbs) Forklift or Dock Door is required at delivery location. Otherwise Please Request Liftgate service from here: Hand Point Down SVG Vector

Request Lift Gate Service ($100)

The Speroni APM 150 is a Well Jet Self-priming water pumps for deep suctions up to 164ft to be used in case of important water level gaps. Suitable to drain water from wells and in domestic fittings by small and medium sized tanks. Before installing the pump verify that all pipes (iron, plastic or rubber) are clean inside so to avoid any obstruction to the ejector nozzle. At the foot of the ejector must be installed a foot valve or a check valve. Installed the pump, fill completely both pipes and pump body with clean water. To preserve an efficient priming it is necessary a certain pression in the circuit, therefore it is recommended to install a membrane tank at the delivery of the pump.

  • Suction depth of up to 164ft
  • Great for draining wells
  • Cast iron pump body

 

SKU 1811111 Categories , , , Tags , , ,

Features

The separate ejector pump is basically a centrifuge with a possibility of becoming a self-priming jet pump with deep suction by fitting the ejector in the well onto the end of the suction pipe. Recirculation of water passing through the Venturi attracts water from below and pushes it through the return (suction) pipe creating enough pressure to take it up to the surface. For these deep suction applications two pipes need to be connected: the delivery pipe to the ejector and the return (suction) outlet, in this case the diameter of the well must be at least 4″.

Operating Conditions

  • Liquid temperature up to 95°F (for home use according to EN 60335-2-41)
  • Temperature max. liquid: 95°F (for other uses)
  • Ambient temperature up to 104°F
  • Total suction lift up to 164ft.
  • Standard ejector P30

Motor

  • Two-Pole induction motor (n = 3450 min-1)
  • Insulation Class F
  • Protection IP 55

Materials

  • Pump body: Cast Iron
  • Motor support: Cast Iron
  • Impellers: Noryl
  • Diffuser: Noryl
  • Ejector: Cast Iron
  • Shaft with rotor: Stainless Steel AISI 304
  • Mechanical seal: Ceramic/Graphite/NBR

Technical Specifications

Model APM 150 (P30)
Brand Speroni
Manufacturer’s Warranty 1 year Limited Warranty
Shipping Weight 66.5lb
Port Size (in.) 1″ & 1.25″
Maximum Flow (GPH) 552 GPH
Maximum Head (ft)

Maximum Suction (ft)

 200ft

164ft
HP 1.5HP
Volts 220V
Suction Port (in.) 1.25″
Discharge Port (in.) 1″
Self-Priming Yes
Dimensions L x W x H (in.) 19.7″ x 9.3″ x 10.8″
Product Weight (lbs.) 61.5lbs

Dimensions

Type Dimensions (inches) Box Dimensions Weight
Single Phase A B C D E F H H1 DNA DNM P L H lb
APM 150 4.1″ 3″ 16.3″ 8.7″ 6.8″ 0.4″ 9.5″ 4.5″ 1.25″ 1″ 9.3″ 19.7″ 10.8 61.5

Performance Table

Type Nominal
Power		 Input
Power		 Amperage Capacity
Single Phase P2 P1 Single Phase Ejector Type Suction Depth GPM 0.8 1.6 2.6 4 5.3 6.6 7.9 9.2
220V 60Hz HP KW KW 1 x 220V lt/1′ 3 6 10 15 20 25 30 35
APM 150 1.5 1.1 1.5 7 P30 35 H(ft) 200 187 167 141 120 47.6
40 183.7 170.6 150.9 124.7 103.3 31.1
50 150.9 137.8 118.1 91.9 21.5 70.5

Related products

Menu

Contact Information

Copyright © 2024 pumpmarket.us All Rights Reserved