FREE SHIPPING, FAST DELIVERY! Dismiss

EASY SELECTOR

  • CALL US
  • +1 (786) 613-5872
  • CALL US
  • +1 (786) 613-5872
  • CALL US
  • +1 (786) 613-5872

WEG SOFT STARTER – 40HP – 208-480VAC – SSW05 WEG – SSW050060T2246EPZ

SKU 5172506 Categories , , ,

WEG SOFT STARTER – 40HP – 208-480VAC – SSW05 WEG – SSW050060T2246EPZ

------

$869.98

Add to Cart

Free Delivery

Estimated 3-5 business days

Note: For all products over 120 lbs, a $250 Residential Delivery & Lift Gate Fee applies to residential addresses.
You can add this service directly to your cart
If this service is not selected and your shipping address is residential, we will contact you after the order is placed to collect the required fee before shippingHand Point Down SVG Vector

The WEG SSW05 Soft Starter is a super compact fully digital soft starter with a state-of-the-art DSP controller. Its digital construction provides optimum operation, diagnostics capability and full motor protection. Simplicity in set-up and operation is assured since all parameters and set-up selections are made via dip switches and potentiometers. Status LED’s alert the user of the operational status of the SSW05. Simplicity, ease of set-up, and Small panel assures quick and easy installation and operation.

colors.png Technical Data

colors.png Warranty

colors.png Catalog

colors.png User Manual

 

  Technical Data
Part Number SSW050060T2246EPZ
Item# 5172506
Base Unit of Measure Each
Horsepower 40 hp
Voltage 208 to 480V AC
Warranty 18 Months
Phase Three Phase
Options Built-In Bypass
Ratings IP00
Product Series SSW05
Amp Rating 60 Amp
Availability In stock
Manufacturer WEG
Dimensions(inch) HxWxD 7.3 x 3.1 x 6.8
Applications PUMPS, FANS, BLOWER, COMPRESSORS
Certifications UL – CE – CS – IRAM – CPT – EAC

 

  Technical Data
Power Supply
Main Voltage
Control Voltage
Frequency
220 … 460 Vac (+10%,-15%)
90 …250 Vac
50 / 60Hz(+/- 5Hz)
Enclosure  IP00 Protected Chassis
Duty  Cycle  300% rated current during 10 seconds, 4 starts per hour
Control Inputs Digital
One input for Start/Stop (90-250 Vac)
One input for Fault Reset (90 – 250 Vac)
Control Outputs Digital
One relay output for Run indication (1 Amp – 250V)
One relay output for Ful Voltage indication (1Amp – 250V)
Communication Serial Interface RS-232C
Safety Protections
Motor overload*
Locked rotor*
Over current
Phase sequence
Phase loss
Safety *Can be disabled SCR overload
Control Features
Pedestal Voltage
Accel Ramp
Decel Ramp
Motor Current
Fault Reset
30 …80% of line voltage
1 …20 Seconds
off …20 seconds
30 … 10% of SSW-05 rating
Manual or Automatic
Ambiente Temperatura 32 …131°F (0-55°C)
Ambiente Humidity 0 …90% Non Condensing
Ambiente Altitude
0…1000m (3.300ft) – Standard Operation at Rated Current
Up to 4000m (13200 ft) – With Current Derating

(1%/100m (328ft) above 1000m (13,200ft))

Conformities low Voltage
UL 508 – Industrial Control Equipment
IEC 60947-4-2
Conformities EMC EMC Directive 89/336 / EEC – Industrial Environ-ment, Class A

 

The WEG SSW05 Soft Starter is a super compact fully digital soft starter with a state-of-the-art DSP controller. Its digital construction provides optimum operation, diagnostics capability and full motor protection. Simplicity in set-up and operation is assured since all parameters and set-up selections are made via dip switches and potentiometers. Status LED’s alert the user of the operational status of the SSW05. Simplicity, ease of set-up, and Small panel assures quick and easy installation and operation.

WEG soft starters are fitted with micro processors. They are high-tech and were designed to ensure the highest performance during starts and stops of induction motors.

Soft-Starters are electronic starters designed to accelerate, deccelerate and protect three-phase induction motors, controlling the voltage applied on the motor.

The SSW05 Plus Micro Soft-Starters, with DSP control (Digital Signal Processor) have been designed to supply an excellent performance during starting and stopping electric motors with excellent cost/benefit ratio.

The Operator Interface allows easy parameter setting, simplyfying the start-up and operation activities.

The SSW05 Plus Micro Soft-Starters are compact, optimizating the space in electrical panels and incorporates all protections for the driven motor.